Project Background 

Nanning Sunshine City Tanyue is located in the West University Prefecture area, surrounded by dozens of universities such as Xiutian Primary School, West University Affiliated Middle School, and School of Finance and Economics, meeting the needs of full age education. The project embraces the First Ring, Fifth Vertical, and Third Subway, surrounded by multiple major roads such as the Expressway, Qingxiang Expressway, and Xiuling Road, to reach every corner of Nanning. Adjacent to Metro Lines 1, 2, and 5 (under construction), it seamlessly connects with major bustling commercial districts in Nanning. In terms of commercial facilities, there are community stores, surrounding Anji Wanda Plaza, Zhenghe Commercial Plaza, and other facilities in the living circle, such as the Sixth Hospital, Ethnic Hospital, Xiulong Vegetable Market, Xiuxiang Vegetable Market, and so on; Surrounded by ecological landscapes such as Flower Park and Mingyue Lake, you can also enjoy convenient life in the west of the city.

Product Application

This project uses our company’s capacitors, controllers, current harmonic suppressors, and contactless switches. Mainly used for reactive power compensation devices, effectively improving power factor, reducing losses, and improving power quality.

Product advantages

>Perform reactive power compensation according to demand to improve power factor

>Using power capacitors with higher rated voltage

>High autonomy in cabinet installation and selection of accessory devices

The BSMJ series self-healing low-voltage parallel power capacitors are suitable for power frequency AC power systems with a rated voltage of 1000V and below, to improve power factor and power quality.

The current harmonic suppressor is made of low loss amorphous alloy material, which is an extremely low temperature and low impedance harmonic suppressor. It is equivalent to a small reactor and is suitable for low-voltage systems of 0.4kV. It can be used in series with capacitors to effectively suppress high-frequency harmonic currents, suppress closing inrush currents, and also damage the resonance between the compensation capacitor and the system, preventing harmonic amplification in the system after capacitor input, Ensure that the compensation capacitor can be safely put into operation without reducing the compensation capacity of the capacitor. Overall epoxy resin sealing, with stable moisture and mold resistance, reasonable structure, and convenient installation.

The JKW series reactive power automatic compensation controller is suitable for the automatic adjustment of capacitor compensation devices in low-voltage distribution systems (hereinafter referred to as the controller), which enables the power factor to reach the user predetermined state, improves the utilization efficiency of power transformers, reduces line losses, improves the voltage quality of power supply, and thus improves economic and social benefits.

The HYKCS series reactive power compensation regulator is an electronic power device module that can quickly switch power parallel capacitors. Its electrical structure is mainly composed of high-power reverse parallel connected thyristor modules, isolation circuits, triggering circuits, synchronous circuit protection circuits, and driving circuits. It is also equipped with terminal blocks for controlling switch conduction or cut-off, and controls logic voltages OV (cut-off) and 12V (conduction). This switch has the characteristics of simple installation, convenient maintenance, fast response speed, no inrush current during switching, stable and reliable operation without noise, and phase loss protection. It is an ideal device for switching capacitor banks in reactive power dynamic compensation devices.